Seed Machinery EXPO
home news forum careers events suppliers solutions markets resources directories advertise contacts search site plan
 
  SeedTech Systems

www.seedtechsystems.com

OUR COMPANY
profile
contacts
OUR PRODUCTS
AIR SEPARATORS
..multiple air chamber system
..wall mount air separators
..mobile cabinet seed separators
AIR DRYERS
..seed dryer systems..
LEARN MORE
visit our website at
www.seedtechsystems.com

 

Seed Dryer Systems
STS-1B-30C
STS-3C

There are three elements, air, temperature and humidity, that if engineered correctly will result in precision seed drying. Air, its quality, temperature, and movement, have an enormous impact on seed conditioning and productivity.

We have discovered that many seed drying problems are caused by an unbalanced drying system. In other words, for every cubic foot of air exhausted an equal amount must be replaced. The simple solution is the exchange of makeup air with fresh air.

Most importantly, the introduction of make-up air eliminates air contamination, exchanges stale air or humidity, eliminates un-proportional air, and maintains proper air stratification for proper seed drying conditions.

Seed drying features

  • STS chamber dryers are designed and engineered for precision of temperature, humidity and air flow for drying all varieties of seed.
  • Seed drying must be as versatile as possible. Yet, the products' temperature, humidity and air flow have to be accurate. If they are not, under drying or over drying can occur. The STS dryers are designed to provide this accuracy.
  • The STS dryer cabinet/chamber models trap air and humidity with precise calibrated temperature and discharge them at a given rate based on seed density and seed moisture content.
  • The operator has the control to increase or decrease the amount of air velocity in the front portion of the dryer plenum. This control allows the operator to increase or discharge excess amounts of air as needed with regards to drying load capacity.
  • Each drying box or chamber has its own damper adjustment. Either to balance air velocity or close off a section.
  • Each drying box or chamber section can be calibrated with air velocity different from the other damper section or chambers at anytime.
  • The STS electric and gas model heating units are both versatile in air flow to provide a more detailed velocity requirement. The Gas Model, however, uses speed control motors and bleeder dampers to adjust air speed and pressure.

Learn more about seed dryer systems: http://www.seedtechsystems.com/dryersystems/

www.seedtechsystems.com


Copyright © SeedQuest - All rights reserved